Has anyone ever run a Viper V10 8.3 engine on an S100?
If so, I assume you had a make your own crank trigger disc?
Running a Viper V10 on S100
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Running a Viper V10 on S100
Dont know of anyone who has, but it wouldnt be too difficult.MSEL wrote:Has anyone ever run a Viper V10 8.3 engine on an S100?
If so, I assume you had a make your own crank trigger disc?
What crank trigger setup does the viper use ?
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: Running a Viper V10 on S100
you might need a new trigger, i found this on the net...
Drew
Drew
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Running a Viper V10 on S100
Well they are evenly spaced.
Although a more conventional multitooth with even spacing might be easier. Just slap one onto the front pulley.
Likely need a cam sensor too ?
Although a more conventional multitooth with even spacing might be easier. Just slap one onto the front pulley.
Likely need a cam sensor too ?