Problema with S60 cosworth

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

the car does not turn on, I do not have injectors and coil, I put an oscilloscope, but it does not start
first:
Image

after reviewing. but it does not start
Image

tomorrow I will change the cables for others with better shielding,
and I'll try
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Problema with S60 cosworth

Post by Alex DTA »

You have a cam sensor issue. That should run fine with sequential/cams turned off.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Problema with S60 cosworth

Post by stevieturbo »

Exactly what is it using for a cam sensor ?

Normal cosworth "Phase" sensor was inside the distributor, and had 2 teeth. This would not be usable without a little modification.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Problema with S60 cosworth

Post by Rob Stevens »

Post up the map. It may be that the sequential or other settings have been changed somehow.
When you say the ecu is ok on another engine, is it exactly the same engine and sensors or did you change the map?
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

I test on another engine by changing the map
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

the car does not start with the cartography that it had previously, and it takes 1 year with her, it had another cartography made with a bigger bridle and it did not start either.
I put a standard and if you turn on, very weird. I modified something in my cartography and now it starts but it shuts down and it has a lot of gas ....... Sensors are ok.
very strange, and if I have handled the programming I had before does nothing ...
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

failure map sensor,
Post Reply