Problema with S60 cosworth

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Problema with S60 cosworth

Post by tastolo »

I have problems with dtas-60, it turned off and it does not turn on, i testing the injectors and coils , the oscilloscope everything works ok, but when turning on nothing, I have loaded several maps that I have and it does not turn on so, I discard settings, the sensors all well and if the actuators operate injectors and coils because when turning on it does not go, the control unit would be damaged?
Thanks.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Problema with S60 cosworth

Post by stevieturbo »

there seems to be a language barrier here.

If you have access to read sensors, oscilloscope etc...then clearly the ecu IS turned on and alive.

So is the problem the engine does not run, or something else ?

Did something occur that leads you to think something may be damaged ?

Has this ever run correctly ?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Problema with S60 cosworth

Post by Alex DTA »

Please post an image of the crankshaft oscilloscope.
If you can do a crank oscilloscope, you can also see the Diagnostics Display.
When you crank the engine, does the Diagnostic Display show the ECU synchronising?
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

I am Spanish and I use a translator, sorry.
the car has been working for 2 years, the other day it went off in the race and it does not turn on, the oscilloscope is ok, when testing injectors and coils, it works but when trying to start it does not work.
tomorrow I will send image
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Problema with S60 cosworth

Post by stevieturbo »

So the ecu is ON and working as normal ?

but the engine will not run ?
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

Ok
Te ecu is running but the engine not run
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Problema with S60 cosworth

Post by Rob Stevens »

'When you crank the engine, does the Diagnostic Display show the ECU synchronising?'
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Problema with S60 cosworth

Post by stevieturbo »

Make a video of the computer screen as you are trying to start the engine with either real time display but also with diagnostic display as Rob and Alex have asked above.
tastolo
Posts: 17
Joined: Wed Sep 14, 2016 7:37 pm
ECU Model: S60 Pro

Re: Problema with S60 cosworth

Post by tastolo »

Saturday I look at it in the vehicle but the ecu is ok, we have tested it in another car and it works, we will test sensors and installation, thanks I will inform you ;)
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Problema with S60 cosworth

Post by stevieturbo »

basics...fuel, air, spark.
Post Reply