Dear all,
The AUX8 can be configured to control an electronic dump valve using the "Turbo control parameters" window.
I cannot find any explanations in the user manual concerning the 4 following parameters:
Electronic Blow Off Time
Electronic Blow Off Pedals Sens.
Electronic Blow Off Blanking Time
Electronic Blow Off Low Limit
Any explanations and advices welcome.
Regards,
Jeremy
Electronic dump valve setup
-
- Posts: 21
- Joined: Thu Dec 14, 2017 4:40 pm
- ECU Model: S100 Pro
- Distributor: DTA UK
- Firmware Version: 79
- Location: France
Electronic dump valve setup
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Electronic dump valve setup
Page 66 of the manual, 11 to 14.
-
- Posts: 21
- Joined: Thu Dec 14, 2017 4:40 pm
- ECU Model: S100 Pro
- Distributor: DTA UK
- Firmware Version: 79
- Location: France
Re: Electronic dump valve setup
Alex
Just download and print the lastest version of the user manual. The one I received with my 2nd hand ECU was quite old.
Thanks a lot, everything is detailed.
Just download and print the lastest version of the user manual. The one I received with my 2nd hand ECU was quite old.
Thanks a lot, everything is detailed.
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)