Electronic dump valve setup

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
INDYabusa
Posts: 21
Joined: Thu Dec 14, 2017 4:40 pm
ECU Model: S100 Pro
Distributor: DTA UK
Firmware Version: 79
Location: France

Electronic dump valve setup

Post by INDYabusa »

Dear all,

The AUX8 can be configured to control an electronic dump valve using the "Turbo control parameters" window.
I cannot find any explanations in the user manual concerning the 4 following parameters:
Electronic Blow Off Time
Electronic Blow Off Pedals Sens.
Electronic Blow Off Blanking Time
Electronic Blow Off Low Limit

Any explanations and advices welcome.

Regards,

Jeremy
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Electronic dump valve setup

Post by Alex DTA »

Page 66 of the manual, 11 to 14.
INDYabusa
Posts: 21
Joined: Thu Dec 14, 2017 4:40 pm
ECU Model: S100 Pro
Distributor: DTA UK
Firmware Version: 79
Location: France

Re: Electronic dump valve setup

Post by INDYabusa »

Alex

Just download and print the lastest version of the user manual. The one I received with my 2nd hand ECU was quite old.

Thanks a lot, everything is detailed.
Westfield Megabusa 1300 (Hayabusa powered Seven style kitcat and soon with DTA S100 ecu)
Post Reply