C20xe N/A with DTA E48

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
alinomie
Posts: 1
Joined: Sun Mar 18, 2018 5:05 am
ECU Model: No ECU

C20xe N/A with DTA E48

Post by alinomie »

Hi all.
i'm new to all this programmable ecu marlarky.

I have a Ford Escort G3 fitted with an all steel Vauxhall 2.0 xe with 45 dcoe's , cams etc. Car came with a DTA E48 but was down on power and with an event coming up I borrowed an already mapped MBE ecu from a mate to get me through event, I got fuelling pretty much spot on (for a pair of DCOE's) maybe running slightly rich to be safe.
Anyway car went well on MBE swapped back to my DTA and bought a laptop hook up lead to view map. map shows 50degs at 6.5k surely that's at time bomb?
I have a TPS sensor fitted.
below is a picture of map
Image

i'm thinking i'll load the standard map saved in dta fast software and work from there, unless anyone have an xe ignition map suitable for my car.

Also how to I get live trace up on screen? when I opened real time mapping I had a a selection of small windows as shown
Image
the live trace ignition and a fuel tables were there when I first opened , I clicked them to see if they'd open up and they disappeared?? how to I get them back? there is no option in the drop down menus
Last edited by alinomie on Sun Mar 18, 2018 7:12 am, edited 3 times in total.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: C20xe N/A with DTA E48

Post by stevieturbo »

Photobucket is not allowing your photos.

And any single screenshot can be misleading...upload the entire map.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: C20xe N/A with DTA E48

Post by katana »

stevieturbo wrote:Photobucket is not allowing your photos.

And any single screenshot can be misleading...upload the entire map.
Get yourself a Browser Photobucket extension Steve - they show fine for me!
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: C20xe N/A with DTA E48

Post by Alex DTA »

The 50 degrees values are at low load and high RPM, so will be fine.

Attached is a screen settings from my PC, which should fix the display problem.
Attachments
DTA.zip
(293 Bytes) Downloaded 391 times
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: C20xe N/A with DTA E48

Post by stevieturbo »

katana wrote:
stevieturbo wrote:Photobucket is not allowing your photos.

And any single screenshot can be misleading...upload the entire map.
Get yourself a Browser Photobucket extension Steve - they show fine for me!
They're showing now ! And no extension ! lol
Post Reply