DTA P8 Pro - Rover K Series

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
MGFMINI
Posts: 54
Joined: Thu May 05, 2016 6:39 am
ECU Model: P8 Pro
Location: Somerset, UK

DTA P8 Pro - Rover K Series

Post by MGFMINI »

Good evening,
I have just finished wiring on my race car with a Rover k series 1.8 running ITBs and MSD ford duratec type coil, DTA P8 Pro ECU and was wondering if anyone has a similar set up that would be prepared to share a map to assist me with getting it fired up?

Thanks in advance
Last edited by MGFMINI on Mon Apr 02, 2018 3:23 pm, edited 1 time in total.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: DTA P8 Pro - Rover K Series

Post by Rob Stevens »

Sorry my old laptop got flooded and I have lost all my old dta-win files. but its easy to just copy over the settings from the S series K maps. Just figure out by counting the teeth on your flywheel what K series flywheel you have and use the manuel to help select VVC or normal.
Post Reply