Blow off valve routed to exhaust.

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
2JvLo
Posts: 11
Joined: Wed Sep 13, 2017 1:39 am
ECU Model: S80 Pro

Blow off valve routed to exhaust.

Post by 2JvLo »

Goodday you all.

If the blow off valve would be routed into the exhaust, it would fill it with fresh air on overrun. combined with a tad fuel on overrun this could produce some pretty flames without melting the turbo and exhaust valves i guess?

I thought it might be funny to try some time, But if i thought of it so will others. Anyone here that has tried something like this? Couldn't find anything on the web.

Just a thought :lol:
dannyboy
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Re: Blow off valve routed to exhaust.

Post by dannyboy »

like this?
Attachments
27048360_10155243884557844_2110729361_o.jpg
dannyboy
Posts: 56
Joined: Thu Mar 17, 2016 5:20 pm
ECU Model: S40 Pro

Re: Blow off valve routed to exhaust.

Post by dannyboy »

ahh sorry just re read post you said blow off valve not wastage..... :oops: :P
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Blow off valve routed to exhaust.

Post by Jon K »

Not sure if flames are the desired result but it's an interesting thought
1992 700RWHP Pump Gas BMW
Image
Post Reply