Page 1 of 1
Fan relay
Posted: Mon Jun 04, 2018 2:56 pm
by molecular bob
I am going to run my radiator fan via the ecu, but what spec of relay should I be using? Most OEM ones seem to have a diode or resister for fans. Would it be wise to do the same? at the moment I have a stock 4 pin hella 30A one, but easy enough to swap it out if it would be better to have a flyback protected one?
Is there a preferred part number for use as a fan relay?
Thanks
Ian B.
Re: Fan relay
Posted: Mon Jun 04, 2018 5:14 pm
by stevieturbo
Any simple automotive relay will be fine
Re: Fan relay
Posted: Tue Jun 05, 2018 12:59 am
by Andy-reid
usually the relay with the diode across the coil wingdings is there to protect the ecu from back emf and electrical noise in the wiring most aftermarket ecu's seem to be able to tolerate this beter than original units
molecular bob wrote:I am going to run my radiator fan via the ecu, but what spec of relay should I be using? Most OEM ones seem to have a diode or resister for fans. Would it be wise to do the same? at the moment I have a stock 4 pin hella 30A one, but easy enough to swap it out if it would be better to have a flyback protected one?
Is there a preferred part number for use as a fan relay?
Thanks
Ian B.