E48 Fuel Pump control

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Cartoony
Posts: 4
Joined: Mon Nov 28, 2016 12:20 pm
ECU Model: No ECU
Firmware Version: 22.3

E48 Fuel Pump control

Post by Cartoony »

If i turn on the ignition but don't start the engine, the fuel pump runs for about 3 seconds.

Could someone please tell me where I find the setting in the software to change it to 10 seconds?

Thanks in advance.
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: E48 Fuel Pump control

Post by Mr Drew »

Its a fixed value, There is no setting.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: E48 Fuel Pump control

Post by stevieturbo »

As above....3 seconds is quite adequate anyway
Post Reply