Dta s60 pro afr injector dead time
-
- Posts: 46
- Joined: Wed Feb 14, 2018 8:05 am
- ECU Model: S60 Pro
- Distributor: creative custom racing Frank
- Firmware Version: 79.06
Dta s60 pro afr injector dead time
I have an LC-2 innovate on my hayabusa and it's been properly calibrated and all but its giving me crazy afr readings sayings its lean when it clearly isn't, would injector dead time have something to do with this?
Re: Dta s60 pro afr injector dead time
How do you know its clearly not lean? A rich mixture that burns in the pipe will show lean as will a very rich mixture that hasn't burnt at all, due to excessive oxygen present.
-
- Posts: 46
- Joined: Wed Feb 14, 2018 8:05 am
- ECU Model: S60 Pro
- Distributor: creative custom racing Frank
- Firmware Version: 79.06
Re: Dta s60 pro afr injector dead time
The rich rich smell of the fuel its producing and unburnt fuel flames its producing
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Dta s60 pro afr injector dead time
gsxr2mil wrote:I have an LC-2 innovate on my hayabusa and it's been properly calibrated and all but its giving me crazy afr readings sayings its lean when it clearly isn't, would injector dead time have something to do with this?
No.
How about giving some details of the install, where the sensor is mounted etc etc ?
And lets face it Innovate arent renowned for their reliability when it comes to sensors
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: Dta s60 pro afr injector dead time
Does the closed loop control work properly at all? At idel even perhaps. Can it control the pattern fueling test