Throttle Blipper

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
RobS2
Posts: 9
Joined: Tue Mar 19, 2019 3:50 am
ECU Model: S100 Pro

Throttle Blipper

Post by RobS2 »

Is there anything that needs to be done to enable the throttle blipper? I assume that you just need to connect to pin 28?

As it uses Coil driver 10, does this have any impact if using individual amplified coils?

Is there an easy way to check the output is working?
Post Reply