Rtcm power control module
-
- Posts: 82
- Joined: Fri May 30, 2014 7:36 am
- ECU Model: S60 Pro
- Distributor: mosley rolling road
- Firmware Version: 66
Rtcm power control module
Any one using one, trying to find out if it has in built controls for thing like wipers, hazards and light controls. Last 4 builds I've used carter pdm and very happy with them but got a car coming we're there's no room for the panel so need a remote switch pdm. Any advice would be great.
Last edited by swsupermoto on Thu Sep 20, 2018 3:49 pm, edited 1 time in total.
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Rtcm
And rtcm is ?
-
- Posts: 82
- Joined: Fri May 30, 2014 7:36 am
- ECU Model: S60 Pro
- Distributor: mosley rolling road
- Firmware Version: 66
Re: Rtcm
Power control module sold by dta.
Re: Rtcm power control module
I haven't used one but have been looking into getting one and having a play with the software. It can do wiper, hazards etc but it all needs to be configured through the software.
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Rtcm power control module
We've done a couple now. They work well, and I find them pretty easy to set up.
If you download the software from our website, there's an example config included which shows how to set up wipers etc.
The RTCM can also use the 3 lights on the keypads to alert you that there's a problem, or everything is working as normal
The NTDASH already has the CAN data set up to show the outputs from the RTCM, so you can add those as well if required.
There are also icons shipped with the dash to make proper indicator and headlight dashboard layouts, all triggered from the RTCM.
If you download the software from our website, there's an example config included which shows how to set up wipers etc.
The RTCM can also use the 3 lights on the keypads to alert you that there's a problem, or everything is working as normal
The NTDASH already has the CAN data set up to show the outputs from the RTCM, so you can add those as well if required.
There are also icons shipped with the dash to make proper indicator and headlight dashboard layouts, all triggered from the RTCM.
-
- Posts: 29
- Joined: Mon Jul 16, 2012 8:31 am
- ECU Model: No ECU
- Firmware Version: 34
Re: Rtcm power control module
Hi Alex, do you sell a 4 pin connector for these and the stickers sheet separately?
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Rtcm power control module
Hi Paul
I have the connectors in stock, I've not had any spare sticker sheets. I'll find out if we can get them.
I have the connectors in stock, I've not had any spare sticker sheets. I'll find out if we can get them.