dta p8 pro not working turbo

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
ss77
Posts: 5
Joined: Thu Nov 15, 2018 11:41 pm
ECU Model: P8 Pro

dta p8 pro not working turbo

Post by ss77 »

dta p8 pro the interior map does not work well. under pressure you can play and adjust. stops at 100mp and does not go over it even if the map is long. the map sensor works. what is the setting wrong? excuse my bad english I'm from Finland. :lol:
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: dta p8 pro not working turbo

Post by stevieturbo »

I think we will need a translator !

Exactly what stops at 100 ? can you show a picture ?

Are you using throttle as load, or MAP ?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: dta p8 pro not working turbo

Post by Rob Stevens »

Your English is better than our Finish :)
From what I suspect you are trying to say is that the pressure sensor is not calibrated?
Do you have a 3bar sensor and it only calibrated to 1bar perhaps.
ss77
Posts: 5
Joined: Thu Nov 15, 2018 11:41 pm
ECU Model: P8 Pro

Re: dta p8 pro not working turbo

Post by ss77 »

how the sensor is calipred?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: dta p8 pro not working turbo

Post by Rob Stevens »

see attached, in this example is a 2.5bar sensor. adjust the offset so that the main display reads atmospheric with engine not running. Don't try to open 2 windows at the same time.
Attachments
Capture.JPG
ss77
Posts: 5
Joined: Thu Nov 15, 2018 11:41 pm
ECU Model: P8 Pro

Re: dta p8 pro not working turbo

Post by ss77 »

circled I had 300kps and 0.020 Still real data will not rise above 108kps even if the pressure is bigger. where's the problem?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: dta p8 pro not working turbo

Post by Rob Stevens »

Do you have a 3 bar map sensor?
ss77
Posts: 5
Joined: Thu Nov 15, 2018 11:41 pm
ECU Model: P8 Pro

Re: dta p8 pro not working turbo

Post by ss77 »

yes
ss77
Posts: 5
Joined: Thu Nov 15, 2018 11:41 pm
ECU Model: P8 Pro

Re: dta p8 pro not working turbo

Post by ss77 »

The dta pox's own 300kpa sensor did not even try it
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: dta p8 pro not working turbo

Post by Rob Stevens »

can you test with an airline?
Post Reply