E48EXP

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
mars77
Posts: 5
Joined: Sat Dec 15, 2018 4:10 pm
ECU Model: No ECU
Firmware Version: 34.0

E48EXP

Post by mars77 »

Hi.
I've owned old e48exp ecu together with bike throttle bodies.
First question is how to find if that's ignition only or ignition and fuel model.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: E48EXP

Post by Alex DTA »

If it says E48I, it's ignition only. Otherwise it's fuel and injection.
If it came with the bodies, chances are it FI.

If you can read the serial number, post it her (or email it if you prefer) and I'll confirm on Monday.
mars77
Posts: 5
Joined: Sat Dec 15, 2018 4:10 pm
ECU Model: No ECU
Firmware Version: 34.0

Re: E48EXP

Post by mars77 »

It's say E48EXP and serial no is 7781.
Do I need key for it to be able make changes to maps.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: E48EXP

Post by Rob Stevens »

The ecu may need a PIN, depends on how the last user left it. I think DTA can unlock if you need the PIN and don't know it.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: E48EXP

Post by Alex DTA »

We can.
Email office@dtafast.co.uk, and we'll get you sorted.
Kind regards

Alex
mars77
Posts: 5
Joined: Sat Dec 15, 2018 4:10 pm
ECU Model: No ECU
Firmware Version: 34.0

Re: E48EXP

Post by mars77 »

Thanks.
I've already dropped message on to DTAfast messenger.
My next question about launch control and flat shifter.
Do I need for them two abs sensors connected and is clutch pedal the best place for flat shifter switch.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: E48EXP

Post by katana »

If you are flat shifting why would you be using the clutch? Better on the gear lever - no?
mars77
Posts: 5
Joined: Sat Dec 15, 2018 4:10 pm
ECU Model: No ECU
Firmware Version: 34.0

Re: E48EXP

Post by mars77 »

My gearbox doesn't allow me to change gear without clutch pressing.
I can only flat shifting with open throttle.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: E48EXP

Post by Alex DTA »

You can do that with a clutch switch, yes.
Not sure if there's much benefit, and it's not particularly mechanically sympathetic
mars77
Posts: 5
Joined: Sat Dec 15, 2018 4:10 pm
ECU Model: No ECU
Firmware Version: 34.0

Re: E48EXP

Post by mars77 »

Alex DTA wrote:We can.
Email office@dtafast.co.uk, and we'll get you sorted.
Kind regards

Alex
Thanks for your support via email.
Is for my E48 ecu software available on DTA website to download and what windows will operate it.
Post Reply