Page 1 of 2

E48EXP

Posted: Sat Dec 15, 2018 4:25 pm
by mars77
Hi.
I've owned old e48exp ecu together with bike throttle bodies.
First question is how to find if that's ignition only or ignition and fuel model.

Re: E48EXP

Posted: Sat Dec 15, 2018 5:19 pm
by Alex DTA
If it says E48I, it's ignition only. Otherwise it's fuel and injection.
If it came with the bodies, chances are it FI.

If you can read the serial number, post it her (or email it if you prefer) and I'll confirm on Monday.

Re: E48EXP

Posted: Sat Dec 15, 2018 5:50 pm
by mars77
It's say E48EXP and serial no is 7781.
Do I need key for it to be able make changes to maps.

Re: E48EXP

Posted: Sun Dec 16, 2018 3:56 am
by Rob Stevens
The ecu may need a PIN, depends on how the last user left it. I think DTA can unlock if you need the PIN and don't know it.

Re: E48EXP

Posted: Sun Dec 16, 2018 4:10 am
by Alex DTA
We can.
Email office@dtafast.co.uk, and we'll get you sorted.
Kind regards

Alex

Re: E48EXP

Posted: Sun Dec 16, 2018 7:51 am
by mars77
Thanks.
I've already dropped message on to DTAfast messenger.
My next question about launch control and flat shifter.
Do I need for them two abs sensors connected and is clutch pedal the best place for flat shifter switch.

Re: E48EXP

Posted: Sun Dec 16, 2018 8:56 am
by katana
If you are flat shifting why would you be using the clutch? Better on the gear lever - no?

Re: E48EXP

Posted: Tue Dec 18, 2018 3:00 pm
by mars77
My gearbox doesn't allow me to change gear without clutch pressing.
I can only flat shifting with open throttle.

Re: E48EXP

Posted: Tue Dec 18, 2018 3:01 pm
by Alex DTA
You can do that with a clutch switch, yes.
Not sure if there's much benefit, and it's not particularly mechanically sympathetic

Re: E48EXP

Posted: Tue Dec 18, 2018 3:03 pm
by mars77
Alex DTA wrote:We can.
Email office@dtafast.co.uk, and we'll get you sorted.
Kind regards

Alex
Thanks for your support via email.
Is for my E48 ecu software available on DTA website to download and what windows will operate it.