S60 2nd map option

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

S60 2nd map option

Post by iceman_n »

hello

i have wired a switch for a 2nd map activation on s60 for eco tuning experiments

i have the new firmware and software too

on engine diagnostic dispaly it shows that is on but on als/map2 parameters still says 1st map is active, i have set all the parameters there

only two times i achieved to make map2 to be activate so i know it works

all my other attemps does not make it possible to activate it

is it me ? is it the firmware ??
Mr Drew
Posts: 62
Joined: Mon Apr 09, 2012 11:08 am
ECU Model: S80 Pro
Firmware Version: 62

Re: S60 2nd map option

Post by Mr Drew »

Did you have the engine running? I'm pretty sure that the map won't switch unless it is.
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: S60 2nd map option

Post by iceman_n »

i have try to switch both ways, with the engine off and ignition switch off too, with engine running and with engine off the ignition switch on that powers the ecu
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 2nd map option

Post by stevieturbo »

And in diagnostic display, does it show the switch is working ?

Are there any other parameters that need met for MAP2 to become active ? You dont have the switch assigned to anything else ? ( I think it can also be for wideband off/on )

But yes, engine does need to be running for MAP2 to be active.
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: S60 2nd map option

Post by iceman_n »

yes in diagnostic display its active ON becomes green

no i dont have the switch assigned to anything else

it was working just for two times then since then nothing, its strange
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 2nd map option

Post by Rob Stevens »

do you have it set to 'always activate when switch on' ?
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: S60 2nd map option

Post by iceman_n »

yes...thats my settings the first of the two times that it worked

Image
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 2nd map option

Post by stevieturbo »

So it's working now ?
iceman_n
Posts: 141
Joined: Mon Jan 16, 2012 1:39 pm
ECU Model: S40 Pro
Firmware Version: 58

Re: S60 2nd map option

Post by iceman_n »

nope its not...i just post the photo from the first two time that it actually works
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: S60 2nd map option

Post by stevieturbo »

So what has changed between now and then ?

Can you load that same map back in again ?
Post Reply