hello
i have wired a switch for a 2nd map activation on s60 for eco tuning experiments
i have the new firmware and software too
on engine diagnostic dispaly it shows that is on but on als/map2 parameters still says 1st map is active, i have set all the parameters there
only two times i achieved to make map2 to be activate so i know it works
all my other attemps does not make it possible to activate it
is it me ? is it the firmware ??
S60 2nd map option
Re: S60 2nd map option
Did you have the engine running? I'm pretty sure that the map won't switch unless it is.
Re: S60 2nd map option
i have try to switch both ways, with the engine off and ignition switch off too, with engine running and with engine off the ignition switch on that powers the ecu
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60 2nd map option
And in diagnostic display, does it show the switch is working ?
Are there any other parameters that need met for MAP2 to become active ? You dont have the switch assigned to anything else ? ( I think it can also be for wideband off/on )
But yes, engine does need to be running for MAP2 to be active.
Are there any other parameters that need met for MAP2 to become active ? You dont have the switch assigned to anything else ? ( I think it can also be for wideband off/on )
But yes, engine does need to be running for MAP2 to be active.
Re: S60 2nd map option
yes in diagnostic display its active ON becomes green
no i dont have the switch assigned to anything else
it was working just for two times then since then nothing, its strange
no i dont have the switch assigned to anything else
it was working just for two times then since then nothing, its strange
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S60 2nd map option
do you have it set to 'always activate when switch on' ?
Re: S60 2nd map option
yes...thats my settings the first of the two times that it worked
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60 2nd map option
So it's working now ?
Re: S60 2nd map option
nope its not...i just post the photo from the first two time that it actually works
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S60 2nd map option
So what has changed between now and then ?
Can you load that same map back in again ?
Can you load that same map back in again ?