Need a map to get my TU5JP4 NFU started
Peugeot 205
Weight : 830 KG
Compression ratio : 190 PSI
Port Polish Head
Cat Cam 1322705
Lift : 10
Duration : 256
Exhaust Manifolds After Marked 4-2-1
throttle Standard port and polish Size 60mm
air intake : simota racing
Map Sensor : GM 3 Bar
WideBande : AFR 10-20
ATM : 1Bar
And Table Use Map As Load
And Need help in installing a four-wire IDLE Valve
TNX
Map For S60 TU5JP4 NFU
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Map For S60 TU5JP4 NFU
This should get you started. Just check the MAP scaling is correct.
- Attachments
-
- TU5 start up.map
- (44.48 KiB) Downloaded 235 times
Re: Map For S60 TU5JP4 NFU
Thankful .
I will check.
The size of the injectors is 196 cc.
I will check.
The size of the injectors is 196 cc.