Fuel supply (not starting)
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Fuel supply (not starting)
1 or 0 on 36 tooth wheel
Re: Fuel supply (not starting)
Cheers, I'll have a little play when I finish work.
Re: Fuel supply (not starting)
Still not having any luck with this.
It says it's synchronised (goes green when turning over and says attempting to start) can anyone see anything wrong?
It says it's synchronised (goes green when turning over and says attempting to start) can anyone see anything wrong?
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Fuel supply (not starting)
If it's staying green, the ECU is seeing the inputs it requires.
Is it still backfiring, either out the exhaust or inlet? If so, you have fuel and spark, just not in the right place.
Upload the Zetec with no Map.map and that should have you close.
Is it still backfiring, either out the exhaust or inlet? If so, you have fuel and spark, just not in the right place.
Upload the Zetec with no Map.map and that should have you close.
Re: Fuel supply (not starting)
Thanks for the reply Alex, I did actually try the zetec with no map last night, I'm thinking I might have my injectors cleaned as they've been sitting a few years, just trying to cross things off the list.
-
- Posts: 68
- Joined: Fri Feb 01, 2019 4:36 pm
- ECU Model: S80 Pro
- Firmware Version: 6500
Re: Fuel supply (not starting)
Did you ever get the car running?