electronic excaust valve

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Tomppa
Posts: 1
Joined: Mon Nov 18, 2019 3:07 pm
ECU Model: S60 Pro

electronic excaust valve

Post by Tomppa »

Hi

Can s60 be used to control electronic excaust valve so that it would open over xrpm/throttle and close when throttle closes?
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: electronic excaust valve

Post by Rob Stevens »

Yes, by one of the aux outputs and a suitable actuator
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: electronic excaust valve

Post by Alex DTA »

If you're not using the VTEC functionality, just use that. You'll need to use a relay if the valve draws more than 1 Amp.
Post Reply