DTA S60 start problem

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
happys60
Posts: 11
Joined: Tue Jul 30, 2013 9:50 am
ECU Model: S60 Pro
Distributor: Arens Motorsport, Holland
Firmware Version: 53

Re: DTA S60 start problem

Post by happys60 »

There is a mistake in the DTASWin engine configuration
Go to "General Engine Settings". Then "Teeth BTDC" change from 1 to 2
Did81
Posts: 9
Joined: Wed Mar 13, 2019 6:23 pm
ECU Model: S60 Pro
Distributor: lortec

Re: DTA S60 start problem

Post by Did81 »

it's already set to 2
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTA S60 start problem

Post by Alex DTA »

Go to Display and Test Functions -> Crankshaft Oscilloscope.
Gather the scope, and post the image here.
Did81
Posts: 9
Joined: Wed Mar 13, 2019 6:23 pm
ECU Model: S60 Pro
Distributor: lortec

Re: DTA S60 start problem

Post by Did81 »

Hello I have already put an image of the oscilloscope on page 1. I redo one today just in case.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: DTA S60 start problem

Post by Alex DTA »

Sorry, I meant when it's running.
It sounds like there are signal issues when running.
Did81
Posts: 9
Joined: Wed Mar 13, 2019 6:23 pm
ECU Model: S60 Pro
Distributor: lortec

Re: DTA S60 start problem

Post by Did81 »

Hello

Here are two crankshaft oscilloscpobe taken at the moment.
The first engine stopped and the second engine turned.

There is a signal problem I think ...

thank you in advance
Attachments
oscillo 1.jpg
oscillo 2.jpg
oscillo 2.jpg (7.39 KiB) Viewed 5216 times
Did81
Posts: 9
Joined: Wed Mar 13, 2019 6:23 pm
ECU Model: S60 Pro
Distributor: lortec

Re: DTA S60 start problem

Post by Did81 »

good evening

The problem was found, I did not connect the case to ground on the external connection of the case.
I thought it was to fix it and not a mass.

Good night
Post Reply