Shift cut / Flat shift with Quaife 60g settings help please

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
rickyc
Posts: 2
Joined: Fri Mar 01, 2019 11:20 am
ECU Model: S40 Pro

Shift cut / Flat shift with Quaife 60g settings help please

Post by rickyc »

Hi,

I have just installed a Quaife 60g into my MK2 escort, running S40 Pro, on Carbs.

The gearbox has a Pot mounted to it and the Ecu see's it fine, I have inputted each gears values into the table.

Please could someone let me the rest of the parameters I need to input, even if its starting values to get me going and the flat shift working.

I wish to retard the ignition and not cut, the Ecu is on the very latest firmware V89.

Thanks
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Shift cut / Flat shift with Quaife 60g settings help ple

Post by Alex DTA »

Starting point attached.
Shift Cut New Closed Loop.png
rickyc
Posts: 2
Joined: Fri Mar 01, 2019 11:20 am
ECU Model: S40 Pro

Re: Shift cut / Flat shift with Quaife 60g settings help ple

Post by rickyc »

Thanks I'll give it a go, appreciated
Post Reply