S-080 Lambda switch question
-
- Posts: 14
- Joined: Tue Jan 28, 2020 5:09 pm
- ECU Model: S80 Pro
S-080 Lambda switch question
Working on a turboed 2004 Hayabusa here with a DTA S-80 running it. Had to do a bit of rewiring as the previous owner had butchered the harness a bit. Has a wire to the Lambda switch pin, but I have no idea what it does?? Any help appreciated.
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: S-080 Lambda switch question
Look at the map that is on the ecu, and refer to manual for options
https://www.dtafast.co.uk/download_file ... Manual.pdf
https://www.dtafast.co.uk/download_file ... Manual.pdf
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: S-080 Lambda switch question
Lambda switch is also Map 2 switch, so it will be one of those two functions
-
- Posts: 14
- Joined: Tue Jan 28, 2020 5:09 pm
- ECU Model: S80 Pro
Re: S-080 Lambda switch question
I have the map downloaded to my computer and have read the manual, do not quite understand it still.
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: S-080 Lambda switch question
I think you need to answer the following.
Does it have a lambda?
If so look in the lambda parameters page an see if the lambda switch is enabled, if so the input turns closed loop on and off.
If this is not checked go to the als/map 2 page and check if this is turned on. Typically this feature is used for anti lag / different boost strategy depending on what additional hardware you have.
Does it have a lambda?
If so look in the lambda parameters page an see if the lambda switch is enabled, if so the input turns closed loop on and off.
If this is not checked go to the als/map 2 page and check if this is turned on. Typically this feature is used for anti lag / different boost strategy depending on what additional hardware you have.