Serail cable connection

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
Vincent
Posts: 2
Joined: Fri Sep 25, 2020 4:34 am
ECU Model: S80 Pro
Distributor: Hurricane

Serail cable connection

Post by Vincent »

Is there a diagram available how the 9 pin connector is connected to the 15 pin connector?
My supplier does not have the cable in stock and can not deliver it before monday.
I have installed a S80 on a BMW Z3M and want to start testing.
I just found put that a standard 9 pin serial cable does not fit in the ECU.

Thanks in advance!
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Serail cable connection

Post by Rob Stevens »

It's in the diagrams, but for simple use its pins 1 to 5 straight through.
Vincent
Posts: 2
Joined: Fri Sep 25, 2020 4:34 am
ECU Model: S80 Pro
Distributor: Hurricane

Re: Serail cable connection

Post by Vincent »

I could not find it in the diagrams.
But massieve thanks for the quick reaction!
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Serail cable connection

Post by stevieturbo »

It is in there, but here is an older one.

This one does not include the flash switch info as it's very old

http://www.quantums.info/injection.htm#cables
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Serail cable connection

Post by Rob Stevens »

Somewhere on this forum you will find instructions on how to construct the knobs box which I find a great asset
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Serail cable connection

Post by stevieturbo »

Rob Stevens wrote:Somewhere on this forum you will find instructions on how to construct the knobs box which I find a great asset
Like in my post above lol
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Serail cable connection

Post by Rob Stevens »

Doh
Post Reply