S60 Firmware upgrade and existing ECU map

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
AK1
Posts: 1
Joined: Fri Oct 30, 2020 9:41 am
ECU Model: S60 Pro

S60 Firmware upgrade and existing ECU map

Post by AK1 »

Hello to everyone!

I am planning to flash the firmware on the S60 to the latest version. On doing so will the map already on the ecu remain as it is or will it get erased?

Also am planning to wire in the VSS on the gearbox of a Honda k20a2 (02 year, engine EP3) to the S60 to get a Gear by Shaft RPM reading. I need to wire it up and could anyone please tell me what input voltage power supply does the VSS sensor need (would it be 12volts or 5 volts).

Thanks in advance
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S60 Firmware upgrade and existing ECU map

Post by Rob Stevens »

Hi, as mentioned elsewhere have a look at the Honda wiring diagram, or try with 5v, most semi conductors work on that. but 2 mins on google suggest its 12v
Post Reply