Feedback requested - changed server up again!

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Feedback requested - changed server up again!

Post by Jon K »

Sandeep it's not you - it's a setting on the forum. I am working to figure it out.
1992 700RWHP Pump Gas BMW
Image
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Feedback requested - changed server up again!

Post by Jon K »

Guys, I looked at this attachment issue or a bit and got frustrated. Finally figured out how the files are handled and set permissions buried in a folder properly. Should be working now!
1992 700RWHP Pump Gas BMW
Image
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Feedback requested - changed server up again!

Post by Alex DTA »

Working for me, thanks. :)
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Feedback requested - changed server up again!

Post by Jon K »

Sorry for the outage guys - I was in Marathon FL for 10 days and it looks like power service here in PA went out for a few hours yesterday or the day before (looks like some of my hardware is up for 18 hrs now) but my router did not recover. All good now.
1992 700RWHP Pump Gas BMW
Image
Bollah
Posts: 130
Joined: Tue Jul 26, 2011 10:15 am
ECU Model: S60 Pro
Firmware Version: 71

Re: Feedback requested - changed server up again!

Post by Bollah »

Nothing overly drastic to worry about, but I've been using http://dtaforum.com as my bookmark and for the past week, the site hasn't been loading, but today I thought I would try www.dtaforum.com and it worked.
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Feedback requested - changed server up again!

Post by Jon K »

Bollah wrote:Nothing overly drastic to worry about, but I've been using http://dtaforum.com as my bookmark and for the past week, the site hasn't been loading, but today I thought I would try http://www.dtaforum.com and it worked.
Thanks Bollah - it was a mistake on my end. External DNS issue. Should work now.
1992 700RWHP Pump Gas BMW
Image
PhillipM
Posts: 177
Joined: Tue May 13, 2014 5:30 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73

Re: Feedback requested - changed server up again!

Post by PhillipM »

Search seems to be borked. Won't let you search even for relevant things like 'trigger' 'sensor' 'camshaft', etc, because they are 'too common'......wtf.

The more than 3 letter limit is annoying too given the searches that are likely to be TPS, MAP, CAM, etc, etc.
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Feedback requested - changed server up again!

Post by Jon K »

Thanks Phillip - that's more a limitation of PHPBB than the server itself. I'll see if there's anything that can be tweaked.
1992 700RWHP Pump Gas BMW
Image
Jon K
Posts: 602
Joined: Fri Dec 04, 2009 1:45 am
ECU Model: S80 Pro
Distributor: DTA UK
Firmware Version: 73
Location: Pennsylvania, USA
Contact:

Re: Feedback requested - changed server up again!

Post by Jon K »

Sorry about the outage today guys - had an ISP issue and kicked over to the secondary and it didn't come up.
1992 700RWHP Pump Gas BMW
Image
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Feedback requested - changed server up again!

Post by Alex DTA »

dtaforum.com doesn't redirect to www.dtaforum.com anymore.
Post Reply