CAN Update rate

This section is dedicated to discussion of DTA engine control units such as the DTA E48 EXP, P8 Pro, DTA S40, S60, S80, and S100, as well as all things ECU related.
Post Reply
filth
Posts: 1
Joined: Wed Aug 19, 2015 3:29 pm
ECU Model: S40 Pro

CAN Update rate

Post by filth »

Hi,

im trying to connect to the DTA S40 via the CAN Interface. Everything works fine and im getting data. However there seems to be an issue with the update rate of the 2003 ID. This id is appearing irregulary on the bus. Im getting delays between 300ms up to 4000ms between these IDs.

This doesnt apply to ID 2000 and 2001, which appear every 20ms, which equates to the set refresh rate of 50HZ.

Anyone had this issue before? Im using the latest firmware.

Thanks!
Post Reply