It is currently Tue Mar 26, 2019 8:22 pm



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: STC DBW - Pin Outputs
PostPosted: Sat Mar 09, 2019 5:58 pm 
Offline

Joined: Mon Jul 16, 2012 8:31 am
Posts: 18
ECU Model: No ECU
Firmware Version: 34
Hi, I am looking into the pin out puts for the below - these are not in the STC wiring diagram and i've had no luck with google searches

BMW Throttle Motor Part No. a2c53142839 E92 M3

Citroen C2 Throttle Pedal Part No. Bosch 0280752240

Thanks

Paul


Top
 Profile  
 
 Post subject: Re: STC DBW - Pin Outputs
PostPosted: Mon Mar 11, 2019 3:41 am 
Offline

Joined: Mon Jul 16, 2012 8:31 am
Posts: 18
ECU Model: No ECU
Firmware Version: 34
I have managed to find the BMW pin outs now, just the Citroen throttle pedal to go.

BMW
1 = Enable connection
2 = 12V / Terminal Bar 87
3 = Ground / Terminal bar 31
4 = Ident. connection
5 = Can Low
6 = Can High
7 = Sensor 1 / Analog
8 = Sensor 1 / Ground
9 = Sensor 1 / Supply 5V


Top
 Profile  
 
 Post subject: Re: STC DBW - Pin Outputs
PostPosted: Mon Mar 11, 2019 3:55 am 
Offline

Joined: Thu Jul 28, 2011 4:10 am
Posts: 912
ECU Model: S100 Pro
I think in the DTA instructions it asks to check with the office that the combination of these two devises is compatible with the STC,


Top
 Profile  
 
 Post subject: Re: STC DBW - Pin Outputs
PostPosted: Mon Mar 11, 2019 4:50 am 
Offline

Joined: Fri Feb 28, 2014 1:03 pm
Posts: 1197
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79
E92 M3 won't work, it requires CAN bus information we don't have.
You can bypass that and just wire the STC directly to the motor, as it's identical to the one used in the S54.

I can't help with the Peugeot one.


Top
 Profile  
 
 Post subject: Re: STC DBW - Pin Outputs
PostPosted: Mon Mar 11, 2019 5:16 am 
Offline

Joined: Mon Jul 16, 2012 8:31 am
Posts: 18
ECU Model: No ECU
Firmware Version: 34
Alex DTA wrote:
E92 M3 won't work, it requires CAN bus information we don't have.
You can bypass that and just wire the STC directly to the motor, as it's identical to the one used in the S54.

I can't help with the Peugeot one.


Thanks Alex, so just use the connections that are in the STC Manual for the BMW?


Top
 Profile  
 
 Post subject: Re: STC DBW - Pin Outputs
PostPosted: Mon Mar 11, 2019 8:33 am 
Offline

Joined: Fri Feb 28, 2014 1:03 pm
Posts: 1197
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79
BMW E46, yes, not BMW Mini.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Theme designed by stylerbb.net © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
All times are UTC - 5 hours