Ana2, Aux2 and fan control

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
Posts: 21
Joined: Sat Sep 03, 2011 9:29 am
ECU Model: S80 Pro

Ana2, Aux2 and fan control

Post by Gadgetman »

I think I may have got myself confused here!

Running an S80 Pro

I have fan control enabled, which I believe takes over AUX2 (Output)

However, I really need to run a compensation map based off an analogue input, which will apply fuel and ignition compensations at certain input readings. Am I right in thinking I can still use Ana2 for this, as it's a INPUT only, and not being used to control the AUX2 output?

And if that's the case, the set up tab work some thing like: Function Active is ticked, but AUX 2 Active Unticked?

Alex DTA
Posts: 1511
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Ana2, Aux2 and fan control

Post by Alex DTA »

Post Reply