Also, googling finds some discussion here, maybe some guys here know for sure
http://www.locostbuilders.co.uk/viewthr ... tid=155528
F20C cam sensor pinout?
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
-
- Posts: 3588
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: F20C cam sensor pinout?
Likewise, if this drawing applies.
All crank/cam sensors on this are 2 wire magnetic. No voltage applied
http://forums.club4ag.com/zerothread?id=4007
Do these engines still use a dizzy based trigger ? or are there proper individual crank and cam sensors ?
All crank/cam sensors on this are 2 wire magnetic. No voltage applied
http://forums.club4ag.com/zerothread?id=4007
Do these engines still use a dizzy based trigger ? or are there proper individual crank and cam sensors ?
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: F20C cam sensor pinout?
Yeah, they're all the earlier engines with the 2 pin sensor fitted unfortunately, you're right, it's just signal and ground on the 2 pin, not sure where I got 5v from.
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: F20C cam sensor pinout?
so do you have the loom or just the sensor? as if it has power it will be split further back in the loom, same as the sensor ground.
Drew
Drew
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: F20C cam sensor pinout?
Just the sensor, no loom to work from.
-
- Posts: 318
- Joined: Tue Aug 09, 2011 2:54 pm
- ECU Model: S80 Pro
- Distributor: Roverdose
- Location: Stevenage
- Contact:
Re: F20C cam sensor pinout?
does it have a flat plastic base for the trigger to go past or does it have a metal pin sticking out the bottom?
Drew
Drew
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: F20C cam sensor pinout?
A flat metal base, just to be a pain
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: F20C cam sensor pinout?
Okay, looks like it's the same pinout as the earlier K20 setup, signal on the left, ground centre, and +12v on the right pin, looking into the sensor, in case anyone else needs it.