Please help, i am desperate. s60 on a K20, 3 vtec valves

[Vinny5]

HI people,

i am struggling to work out where 3 vtec valves wire to on the ecu as there are 3 of them but only 2 pins on the ecu that mention vtec.

there are 2 next to each other on the back of the head by the exhaust manifold and 1 on the chain side of the head.

DO i use all 3? does one them go to the pin on the ecu called "cam control"?

ANy info much appreciated thanks

Ian
07769 612 758

[Alex DTA]

Ian

Is it a K20A?

If so, look at the diagram on page 5 of the S60 wiring diagram. Available here:
http://www.dtafast.co.uk/Downloads/Wiring_Diagrams/

Basically, connect Inlet Cam Sensor to Pin 2. Exhaust cam
sensor to normal cam input, Pin 23.

[Vinny5]

I got this sorted a day after posting. One was the oil temp to do with he vtec which you don't used.
The one next to it is a vtec valve and that is wired to Aux 3 and the one on the timing chain cover is a vtec valve aswell and is wired to cam. Control. Thanks anyway