Hi all, anyone have some calibrations for the S2000 coolant and air temp sensors they wouldn't mind sharing, save me having to borrow a probe?
The S2000/K20A setting is way out and so are 2 sets of calibration figures I found elsewhere for use with other ECU's (perhaps the load resistor in the ecu is different)
F20C/S2000 sensor calibrations
-
- Posts: 1250
- Joined: Thu Jul 28, 2011 4:10 am
- ECU Model: S100 Pro
- Distributor: None-Coil On Plug :)
Re: F20C/S2000 sensor calibrations
Time to dig out the iced water, thermometer and kettle !
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: F20C/S2000 sensor calibrations
Yep, unfortunately the workshop has only the kettle.
-
- Posts: 3586
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: F20C/S2000 sensor calibrations
Hair dryer might work...
Or saucepan with water on cooker.
Or saucepan with water on cooker.
-
- Posts: 177
- Joined: Tue May 13, 2014 5:30 am
- ECU Model: S80 Pro
- Distributor: DTA UK
- Firmware Version: 73
Re: F20C/S2000 sensor calibrations
I don't tend to have hairdryers or cookers at my workshop either