This is now sorted. -ve and signal were back to front, new plug fitted with wires onto the correct pins. Set offset value to 0.010, on diag screen i'm seeing 99 kpa with engine not running and ~45 at idle.
Thanks once again
Map sensor issue
-
- Posts: 32
- Joined: Mon Feb 15, 2016 3:51 pm
- ECU Model: S40 Pro
- Firmware Version: 34.0
- Location: Dalgety Bay, Scotland
- ignitionautosport
- Posts: 577
- Joined: Wed Jul 27, 2011 5:30 am
- ECU Model: S80 Pro
- Location: New Zealand
- Contact:
Re: Map sensor issue
Good stuff.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |