S100 coil driver

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Keithd2959
Posts: 13
Joined: Thu Sep 01, 2016 12:41 am
ECU Model: S100 Pro

Re: S100 coil driver

Post by Keithd2959 »

Thanks pal, tried to change it but managed to change just the fuel map vs map but not the ignition map. Probably need to look deeper.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: S100 coil driver

Post by Alex DTA »

To change load to MAP, go to Engine Configuration -> Main MAP Columns. Tick the tick box.
Keithd2959
Posts: 13
Joined: Thu Sep 01, 2016 12:41 am
ECU Model: S100 Pro

Re: S100 coil driver

Post by Keithd2959 »

Thanks Alex, when I do so only the fuel map is changed and not the ignition map.
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: S100 coil driver

Post by Rob Stevens »

I just tried that and it does change both fuel and ignition maps on v79.02
Post Reply