Page 1 of 1

P8 Pro / G Dash oil temperature inputs and others!

Posted: Sat Feb 11, 2017 6:08 pm
by MGFMINI
Good evening,
Wondering if anyone can help...

I have had to use ANA 3 input for wide band O2 controller 0-5v input which the manual states also for oil temp input with a resistor, are there any other inputs on either the P8 or G Dash that I can do the same to input the oil temp?

Also the RPM and Alert LED I am presuming any 12v led with resistor could be used using the pin 7 +12vdc feeding them and earthed on pins 10, 11, 12 respectfully?

I also would like to run a secondary cooling water pump, which output could i use?

Thanks for any advice
Craig