Question with pretty much every sensor...

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Question with pretty much every sensor...

Post by Rob Stevens »

Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder
Lynx
Posts: 5
Joined: Mon Feb 13, 2017 4:53 pm
ECU Model: S80 Pro

Re: Question with pretty much every sensor...

Post by Lynx »

My mistake...

Coil1 - 1 and 6 cylinder
Coil2 - 3 and 5 cylinder
Coil3 - 4 and 7 cylinder
Coil4 - 2 and 8 cylinder

That would fire 12341234 as it should be according to manual...

That means...

Coil1 - firing 1 and 6 cylinder - bang in 1
Coil2 - firing 3 and 5 cylinder - bang in 5
Coil3 - firing 4 and 7 cylinder - bang in 4
Coil4 - firing 2 and 8 cylinder - bang in 8
Coil1 - firing 1 and 6 cylinder - bang in 6
Coil2 - firing 3 and 5 cylinder - bang in 3
Coil3 - firing 4 and 7 cylinder - bang in 7
Coil4 - firing 2 and 8 cylinder - bang in 2

That would satisfy firing order 15486372 but that still remains a misyery if it is that simple to adjust firing coils 1234 and instead of 5678 firing once more 1234...
Lynx
Posts: 5
Joined: Mon Feb 13, 2017 4:53 pm
ECU Model: S80 Pro

Re: Question with pretty much every sensor...

Post by Lynx »

What type of pin is for dta connector cause I did not get some with ecu cause i bought used...
What to search for? Any code or something? Both connectors are ok
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Question with pretty much every sensor...

Post by stevieturbo »

Firing order is 15486372

Coil output 1 = 1/6
Coil output 2 = 5/3
Coil output 3 = 4/7
Coil output 4 = 8/2

Now depending exactly what coils you are using...if you had one coil per cylinder you could carry on and use all 8 outputs then select twin spark in the software.

But I think you suggested yours is 1 coil per pair of cylinders ? but only 1 trigger wire per coil ?
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Question with pretty much every sensor...

Post by stevieturbo »

ECU connectors are listed in the manual I think.

But same as Link, Motec, Haltech etc etc

Martin at MEF Motorsport can supply, or indeed Alex at DTA.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Question with pretty much every sensor...

Post by katana »

or RS Components
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Question with pretty much every sensor...

Post by stevieturbo »

Post Reply