Pin out for VW combined Temp and Presure

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Pin out for VW combined Temp and Presure

Post by Rob Stevens »

Can anyone help with the pin out for the VW 4 pin T-PRT04 sensor fitted to 1.4 polo's and the like?
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Pin out for VW combined Temp and Presure

Post by stevieturbo »

A little googling of that brings up this image ?

https://uk.images.search.yahoo.com/imag ... e=avastbcl
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Pin out for VW combined Temp and Presure

Post by stevieturbo »

not quite same part number, but pins in same order

https://www.bmotorsports.com/shop/produ ... l5ir716qu0
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Pin out for VW combined Temp and Presure

Post by katana »

stevieturbo wrote:not quite same part number, but pins in same order

https://www.bmotorsports.com/shop/produ ... l5ir716qu0
Steve - that's an Intake Air temp / MAP sensor not oil / coolant temp! Probably why different part #'s LOL!
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Pin out for VW combined Temp and Presure

Post by Rob Stevens »

Well thank you Steve, buggerd if I could find that, about a million places to buy one however.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Pin out for VW combined Temp and Presure

Post by stevieturbo »

katana wrote:
stevieturbo wrote:not quite same part number, but pins in same order

https://www.bmotorsports.com/shop/produ ... l5ir716qu0
Steve - that's an Intake Air temp / MAP sensor not oil / coolant temp! Probably why different part #'s LOL!

yet oddly...it is what was asked for ;)

Nobody mentioned oil nor coolant.
katana
Posts: 455
Joined: Sun Jan 27, 2013 6:08 pm
ECU Model: S60 Pro
Firmware Version: 29

Re: Pin out for VW combined Temp and Presure

Post by katana »

Apologies Brain Fart - I had been looking at a bike site with predominantly oil cooled engines! LOL
Post Reply