Best sensors for S100 NT Dash

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
Huxley
Posts: 39
Joined: Sat May 10, 2014 7:37 am
ECU Model: S60 Pro

Best sensors for S100 NT Dash

Post by Huxley »

Need to get some sensors for the car, Fuel, Oil, Water & oil temp plus air temp ?


Cheers Paul
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Best sensors for S100 NT Dash

Post by stevieturbo »

Sensors to go to the dash direct, or to the ecu and then transmit to the dash ?

There are various part numbers mentioned for the various temperature sensors you might commonly use within the sensor calibrations.

For pressure sensors, KA Sensors would be at the more expensive range, down to cheap chinese stuff. Depends exactly what you want really.
Huxley
Posts: 39
Joined: Sat May 10, 2014 7:37 am
ECU Model: S60 Pro

Re: Best sensors for S100 NT Dash

Post by Huxley »

I'm after fit and forget ones don't want to be doing the job twice if you get my drift, I would assume to the ecu then dash ?
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: Best sensors for S100 NT Dash

Post by ignitionautosport »

I would normally wire to ecu so you can utilise them, and stream the data to dash.
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Best sensors for S100 NT Dash

Post by stevieturbo »

Again, just depends whether the ecu can take in and transmit everything you need, if not some may need to go to direct to the dash. Again depending on how much and what you want to see there.

And I'm sure Alex/DTA can sell you any sensors you'd need too.
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Best sensors for S100 NT Dash

Post by Alex DTA »

We can supply all those sensors if needed.
Just wire them in to the ECU, and they will be available on the dash. No need for duplicates.
Post Reply