Hi Alex,
Yes sorry the output from the LM-1 is currently earthed to the chassis. However it was earthed into the dta sensor ground initially.
Innovate LM1 incorrect readings.
-
- Posts: 1623
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Innovate LM1 incorrect readings.
Most likely that's your problem.
The ECU is directly to the battery, and the LM-1 is to the chassis.
Ground them to the same place, and they should read closer.
Probably too late now, but you would ideally ground the LM-1 by splicing the ECU power ground to ensure no ground offsets.
The ECU is directly to the battery, and the LM-1 is to the chassis.
Ground them to the same place, and they should read closer.
Probably too late now, but you would ideally ground the LM-1 by splicing the ECU power ground to ensure no ground offsets.
Re: Innovate LM1 incorrect readings.
Thanks Alex,
I am working away at the minute so it may be a week or two before we get to this now. Plus theres bigger issues to sort.
I will keep you posted.
I am working away at the minute so it may be a week or two before we get to this now. Plus theres bigger issues to sort.
I will keep you posted.