Auto blipper
-
- Posts: 81
- Joined: Fri May 30, 2014 7:36 am
- ECU Model: S60 Pro
- Distributor: mosley rolling road
- Firmware Version: 66
Auto blipper
Can you use any of dta ecu to control an auto blipper on a h pattern box.
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Auto blipper
Problem with an H Pattern....is differentiating between an upshift and downshift
-
- Posts: 81
- Joined: Fri May 30, 2014 7:36 am
- ECU Model: S60 Pro
- Distributor: mosley rolling road
- Firmware Version: 66
Re: Auto blipper
Only need the down shift. It's a dog box and can't get used to heel and toe braking.
Re: Auto blipper
Do you use the clutch on downshifts - if so you could rig up a clutch switch so the blipper knows difference between up and down? As a biker even having dogs on the gears I very rarely just cog down without the clutch and manual blip - just not smooth otherwise!
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Auto blipper
Exactly my point...with an H pattern the ecu does not know whether you intend to go up/down a gear simple from a typical fore/aft motion.swsupermoto wrote:Only need the down shift. It's a dog box and can't get used to heel and toe braking.
Some sort of switch either on clutch, brakes etc etc could give some sort of indication that a downshift is more likely than an upshift though
Or also if the throttle was below a certain level, that could also indicate a downshift is more likely.
-
- Posts: 1622
- Joined: Fri Feb 28, 2014 1:03 pm
- ECU Model: S40 Pro
- Distributor: DTA
- Firmware Version: 79
Re: Auto blipper
Throttle blipper is only available on the S100 paddle shift system at the moment.swsupermoto wrote:Can you use any of dta ecu to control an auto blipper on a h pattern box.
High on the development list is to make it available on the S80 and S100 based on the gear box pot movement. Aiming to have that done later this year.
-
- Posts: 3577
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Auto blipper
Although in this case...most H-patterns wont have a gear position sensor ?
-
- Posts: 81
- Joined: Fri May 30, 2014 7:36 am
- ECU Model: S60 Pro
- Distributor: mosley rolling road
- Firmware Version: 66
Re: Auto blipper
2 things , first your almost alway on the brakes when you chance down and secondly alway off throttle. When up shifting it's only a slight lift.