It is currently Thu Jun 21, 2018 2:48 pm



Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Cam and cranck sensor????
PostPosted: Sat Nov 11, 2017 3:18 pm 
Offline

Joined: Mon May 16, 2016 8:01 am
Posts: 43
Location: Norway
ECU Model: S60 Pro
Distributor: Kl racing
Hi im looking att the wiring chart for cam and cranck sensors on the S60 but getting confused wen i read the textbox on the bottom left corner.
Can i use both cam and crank magnetic and can i shield them together to sensor GND??
It says i can ony use one at any time so thats whats get me stuck.

_________________
Living life sideways


Top
 Profile  
 
 Post subject: Re: Cam and cranck sensor????
PostPosted: Sat Nov 11, 2017 3:49 pm 
Online

Joined: Fri Feb 28, 2014 1:03 pm
Posts: 1030
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79
You can use two magnetic sensors, that's fine.

The wiring diagram is making sure you don't connect a magnetic crank sensor AND a Hall effect crank sensor.


Top
 Profile  
 
 Post subject: Re: Cam and cranck sensor????
PostPosted: Sat Nov 11, 2017 4:17 pm 
Offline

Joined: Mon May 16, 2016 8:01 am
Posts: 43
Location: Norway
ECU Model: S60 Pro
Distributor: Kl racing
Alex DTA wrote:
You can use two magnetic sensors, that's fine.

The wiring diagram is making sure you don't connect a magnetic crank sensor AND a Hall effect crank sensor.



Aha as i expected :D just wanna be sure..
Tnx for answer Alex

_________________
Living life sideways


Top
 Profile  
 
 Post subject: Re: Cam and cranck sensor????
PostPosted: Fri Feb 16, 2018 3:20 am 
Offline

Joined: Tue Jan 16, 2018 9:38 am
Posts: 31
Location: Aberdeen
ECU Model: S100 Pro
Distributor: DTA
Hi Alex,
On a similar subject - I plan to use a magnetic crank sensor (Pins 12 & 21) and Hall effects cam sensor (Pins 23, 21SG and 5v from 9);
Is this combination ok?

Cheers
Steve


Top
 Profile  
 
 Post subject: Re: Cam and cranck sensor????
PostPosted: Fri Feb 16, 2018 3:52 am 
Online

Joined: Fri Feb 28, 2014 1:03 pm
Posts: 1030
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79
Hi Steve
Yes, that's fine.

The text is meant to warn against fitting a hall and magnetic crank (or cam) sensor to the same ECU.


Top
 Profile  
 
 Post subject: Re: Cam and cranck sensor????
PostPosted: Fri Feb 16, 2018 1:56 pm 
Offline

Joined: Tue Jan 16, 2018 9:38 am
Posts: 31
Location: Aberdeen
ECU Model: S100 Pro
Distributor: DTA
Cheers Alex, I did search the forum and found some useful info, but good to get confirmation!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Theme designed by stylerbb.net © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
All times are UTC - 5 hours