VDO tach

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
molecular bob
Posts: 35
Joined: Wed Feb 22, 2012 3:50 am
ECU Model: No ECU
Firmware Version: 31

VDO tach

Post by molecular bob »

Hi all

I used to run an e48 and was able to drive the VDO tach in my Caterham direct from the tach out on my e48. I have now updated to an s60 and wondered whether the tach out will still drive my tach or whether i will need to run a gutted relay to get it to drive the gauge?

Just at the loom planning stage and for neatness would like to incorporate the drive relay in the loom if i need it.

Ian
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: VDO tach

Post by Alex DTA »

Output from the S60 is the same as the E48.
molecular bob
Posts: 35
Joined: Wed Feb 22, 2012 3:50 am
ECU Model: No ECU
Firmware Version: 31

Re: VDO tach

Post by molecular bob »

Thanks Alex

That's item 1 on the list check off
Post Reply