Split sensor signal possible?

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
TopQ
Posts: 3
Joined: Thu Jan 15, 2015 4:52 am
ECU Model: S80 Pro
Distributor: DTA

Split sensor signal possible?

Post by TopQ »

Hi

Setup:
S80ECU
Stack 8100 dash
5v sensors


Is it possible to split the ingoing signal to the S80 from the sensor (for instance oil pressure) and route it to the Stack dash?

Ground and 5v runs trough the S80ECU. Do not like multiple sensors for the same mesurements.

Any help apreciated.
stevieturbo
Posts: 3577
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Split sensor signal possible?

Post by stevieturbo »

If it is a 3 wire powered sensor and you wish to share the outpout, generally that is doable ok.

Not for 2 wire sensors though.
TopQ
Posts: 3
Joined: Thu Jan 15, 2015 4:52 am
ECU Model: S80 Pro
Distributor: DTA

Re: Split sensor signal possible?

Post by TopQ »

Thank you!

Will try tomorrow.

Q.
Post Reply