Oil Pressure signal filter value S40

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
tryolz
Posts: 24
Joined: Tue Sep 20, 2016 4:47 am
ECU Model: S60 Pro
Distributor: xap
Firmware Version: 61
Location: Ardeche, France

Oil Pressure signal filter value S40

Post by tryolz »

Hi All,
does anyone here has already used the filter value for Oil Pressure signal ?
I want to use it because for lets say approximately 100 ms on high braking i have an oil pressure alert on the dash and there is no way on these stupid AIM MXS strada dash to say trigger an alarm after for example 500 ms of pressure lower than 1.5bars like on the XAP.
so I want to use the filter value to avoid those annoying alarms.
unfortunately on the Version 82.15 of the DTASwin software the value does not seems to be changed !!!
If anyone has an Idea on how i can solve this issue and also an idea of the impact of this filter value ?
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Oil Pressure signal filter value S40

Post by Alex DTA »

When you say the value doesn't seem to change, what happens?
tryolz
Posts: 24
Joined: Tue Sep 20, 2016 4:47 am
ECU Model: S60 Pro
Distributor: xap
Firmware Version: 61
Location: Ardeche, France

Re: Oil Pressure signal filter value S40

Post by tryolz »

I have not tested it while connected to the ecu but the value is not saved in the file with the 82.15 i have downloaded the latest version on another pc and the value is correctly saved i will give it a go once possible but can you give me an idea on the impact of a filter value of 20 instead of 5 which seems the default value !!!!
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Oil Pressure signal filter value S40

Post by Alex DTA »

Mine works fine.
Make sure you press F4, as well as save the map to your PC.

The higher that value, the more the ECU uses the previous values. This reduces the effect a spike has on the voltage.
tryolz
Posts: 24
Joined: Tue Sep 20, 2016 4:47 am
ECU Model: S60 Pro
Distributor: xap
Firmware Version: 61
Location: Ardeche, France

Re: Oil Pressure signal filter value S40

Post by tryolz »

Ok as I was not connected to the ecu I may have forgotten to press F4
I will try it thanks anyway and sorry
Rob Stevens
Posts: 1247
Joined: Thu Jul 28, 2011 4:10 am
ECU Model: S100 Pro
Distributor: None-Coil On Plug :)

Re: Oil Pressure signal filter value S40

Post by Rob Stevens »

My understanding of the filter value is it's smoothing over time, the bigger the number = more time but im unsure of what scale ms or seconds
Post Reply