Honda K20

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
rocar
Posts: 107
Joined: Sat Sep 10, 2011 8:20 am

Honda K20

Post by rocar »

Plans to install an S60 on a Civic K20,does anybody done?Would like to know if oem crank sensors and crank trigger wheel works,cam sensor and TPS....
stevieturbo
Posts: 3578
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Honda K20

Post by stevieturbo »

There is a base map supplied with DTA for a K20, so I assume it should work ok.

info files say's it's a K20A2 fitted in a Mini.

general settings, Flywheel mode 7
rocar
Posts: 107
Joined: Sat Sep 10, 2011 8:20 am

Re: Honda K20

Post by rocar »

Well I would like to be sure and that somebody done it already,I already tried with a B series which it suppose to work with the oem distributor on manual but it does not and had to fit a trigger wheel
stevieturbo
Posts: 3578
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Honda K20

Post by stevieturbo »

Sorry, no idea then.
JON-TEC-RALLYE
Posts: 38
Joined: Sat Jul 30, 2011 4:35 pm
ECU Model: S100 Pro
Distributor: JON-TEC-RALLYE
Firmware Version: 89
Location: Canary-Island

Re: Honda K20

Post by JON-TEC-RALLYE »

k20, s-60 works with no problem, including the oem wheel, all dta accepts sensors. engines are running (in competition). the end of the wiring diagram, there is a section to follow. k20 dta base map will be a good start.
DTA--MoTec--Link--Ecumaster--HONDATA
tecing
Posts: 26
Joined: Wed Jul 20, 2011 12:51 pm
ECU Model: S80 Pro
Distributor: www.mactecracing.com
Firmware Version: 63
Location: Thailand

Re: Honda K20

Post by tecing »

Confirm...!! good work. You can follow S60 wiring and can be use K20A start up in DTASwin, if your wiring OK.... your engine easy to start. :lol:

I Used S80 in Civic FD2 for competition in Thailand.

Image

Image

Image



B series i think can be work and D series with AEM trigger work sure..!!

Image

Image
rocar
Posts: 107
Joined: Sat Sep 10, 2011 8:20 am

Re: Honda K20

Post by rocar »

Thanks will start project soon then..
Post Reply