Honda K20
-
- Posts: 3578
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Honda K20
There is a base map supplied with DTA for a K20, so I assume it should work ok.
info files say's it's a K20A2 fitted in a Mini.
general settings, Flywheel mode 7
info files say's it's a K20A2 fitted in a Mini.
general settings, Flywheel mode 7
Re: Honda K20
Well I would like to be sure and that somebody done it already,I already tried with a B series which it suppose to work with the oem distributor on manual but it does not and had to fit a trigger wheel
-
- Posts: 3578
- Joined: Tue Aug 02, 2011 12:08 pm
- ECU Model: No ECU
- Location: Norn Iron
Re: Honda K20
Sorry, no idea then.
-
- Posts: 38
- Joined: Sat Jul 30, 2011 4:35 pm
- ECU Model: S100 Pro
- Distributor: JON-TEC-RALLYE
- Firmware Version: 89
- Location: Canary-Island
Re: Honda K20
k20, s-60 works with no problem, including the oem wheel, all dta accepts sensors. engines are running (in competition). the end of the wiring diagram, there is a section to follow. k20 dta base map will be a good start.
DTA--MoTec--Link--Ecumaster--HONDATA
-
- Posts: 26
- Joined: Wed Jul 20, 2011 12:51 pm
- ECU Model: S80 Pro
- Distributor: www.mactecracing.com
- Firmware Version: 63
- Location: Thailand
Re: Honda K20
Confirm...!! good work. You can follow S60 wiring and can be use K20A start up in DTASwin, if your wiring OK.... your engine easy to start.
I Used S80 in Civic FD2 for competition in Thailand.
B series i think can be work and D series with AEM trigger work sure..!!
I Used S80 in Civic FD2 for competition in Thailand.
B series i think can be work and D series with AEM trigger work sure..!!
Re: Honda K20
Thanks will start project soon then..