It is currently Mon Dec 17, 2018 5:51 am



Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Thu Aug 30, 2018 2:00 pm 
Offline

Joined: Wed Feb 14, 2018 8:05 am
Posts: 21
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06
For some reason my bike keeps killing crankshaft magnetic position sensores which causes the bike to run funny and cut off all the time, is anyone experiencing anything like this. I have the correct shielded 22 guage wire and all i was told to use and still now luck at all. When i go back on my datalog the crank error numbers constantly change and when they do the bike runs extremely crazy or shuts off.


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Thu Aug 30, 2018 2:25 pm 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2914
Location: Norn Iron
ECU Model: No ECU
What sensor ?


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Thu Aug 30, 2018 2:30 pm 
Offline

Joined: Wed Feb 14, 2018 8:05 am
Posts: 21
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06
Oem magnetic crank position sensor


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Thu Aug 30, 2018 3:07 pm 
Offline

Joined: Thu Jul 28, 2011 4:10 am
Posts: 874
ECU Model: S100 Pro
assume it's connected the right way round and it's not somehow loose in the engine. I have a 'bussa and the stock sensor has been bomb proof so would assume the Gsxr 1000 is much the same? Is the trigger hitting it perhaps?
From your description I conclude that it runs fine for a while, then fails so you put a new sensor in, runs fine for a while then fails etc? Is that what you are saying?


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Thu Aug 30, 2018 3:10 pm 
Offline

Joined: Wed Feb 14, 2018 8:05 am
Posts: 21
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06
Yes it is thats why i dont understand it, i even measured the air gap between sensor and pickup wheel teeth to make sure this is like the 10th sensor since ive got this standalone a year and a half ago. Im so not understanding whats going on & its getting very aggravating, eas at the track the other day in the water box and the sensor just shut off whill doing a burn out


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Fri Aug 31, 2018 3:17 am 
Offline

Joined: Thu Jul 28, 2011 4:10 am
Posts: 874
ECU Model: S100 Pro
honestly sounds more like a wiring issue. if you put the old sensor back in it will probably be ok again? changing 10 sensors is mad


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Fri Aug 31, 2018 5:46 am 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2914
Location: Norn Iron
ECU Model: No ECU
Yup...what does the scope trace show when good, bad, other ?

or better still a proper oscilloscope reading ?


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Sat Sep 01, 2018 5:23 pm 
Offline

Joined: Wed Feb 14, 2018 8:05 am
Posts: 21
ECU Model: S60 Pro
Distributor: creative custom racing Frank
Firmware Version: 79.06
Can i just run my bike off of the cam sensor?


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Sun Sep 02, 2018 4:21 am 
Offline

Joined: Tue Aug 02, 2011 12:08 pm
Posts: 2914
Location: Norn Iron
ECU Model: No ECU
I would think not, and unless it had a lot of teeth, would offer very poor resolution, especially for a high rpm bike engine.


Top
 Profile  
 
 Post subject: Re: Crank sensor errors gsxr1000 motorcycle s60 pro
PostPosted: Mon Sep 03, 2018 2:48 am 
Offline

Joined: Fri Feb 28, 2014 1:03 pm
Posts: 1139
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79
No


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ]  Go to page 1, 2  Next

Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Theme designed by stylerbb.net © 2008
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
All times are UTC - 5 hours