Using non listed preset map sensor

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

Using non listed preset map sensor

Post by c2turbo »

How can I use or can I use a Map senor that is not listed in the Preset list when i change the values in the table it does not save the settings even if i update and save the map ?

what am i doing wrong ?

Thanks Dave
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Using non listed preset map sensor

Post by Alex DTA »

If you have the scaling, simply enter the values in the table and save.
c2turbo
Posts: 44
Joined: Mon Dec 26, 2011 11:26 pm
ECU Model: S80 Pro
Firmware Version: 89

Re: Using non listed preset map sensor

Post by c2turbo »

The main issue I am having is it will not let me enter a period for .5 volts or 4.5 volts
the period does not work on the volt table for me but works fine on the psi table i am confused if it is only entered in mv then why are there periods in the presets?


Thanks David
Alex DTA
Posts: 1622
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Using non listed preset map sensor

Post by Alex DTA »

There aren't periods in the voltage table, those are all millivolts.

The thousands separator is entered automatically as a format mask. If you type 4000, it will show as 4,000 in the UK, and 4.000 in Europe.
Post Reply