Idle Speed Control Valve

Discuss which Sensors work best with these ECUs and share how you are using inputs and outputs
Post Reply
grant620
Posts: 44
Joined: Mon Sep 19, 2011 7:22 am
ECU Model: S60 Pro
Firmware Version: 61

Idle Speed Control Valve

Post by grant620 »

Hi

I've got an engine that needs an ISCV. The pipe leading to it when fully blocked to fully open gives me a range of +/-300RPM.

I need a 2 port, 2 pin ISCV that is fully sealed at 100%. Any ideas?
Could possibly use a 3 wire model if needed...
Cheers
Grant
http://www.gb-ent.com
Performance Engine Solutions
Image
01278651044
User avatar
ignitionautosport
Posts: 577
Joined: Wed Jul 27, 2011 5:30 am
ECU Model: S80 Pro
Location: New Zealand
Contact:

Re: Idle Speed Control Valve

Post by ignitionautosport »

big old Bosch 2wire one? (I forget part number haven't used one in over a decade haha) I'd just use ignition timing, but assume there's a reason you aren't keen.

update: found an image with part number Image
| '94 GSR Lancer | '96 Toyota Carib 20V | '83 Toyota Starlet | www.ignitionautosport.co.nz |
Alex DTA
Posts: 1562
Joined: Fri Feb 28, 2014 1:03 pm
ECU Model: S40 Pro
Distributor: DTA
Firmware Version: 79

Re: Idle Speed Control Valve

Post by Alex DTA »

I have one in stock, but make sure you're sitting down if you want a price.
stevieturbo
Posts: 3362
Joined: Tue Aug 02, 2011 12:08 pm
ECU Model: No ECU
Location: Norn Iron

Re: Idle Speed Control Valve

Post by stevieturbo »

Many valves like the above second hand on egay etc. ( this seems new )...can't comment if they're fully open or closed though


eg

https://www.ebay.co.uk/itm/255513094690 ... SwFxJibCY-
Post Reply